Marijuana Autoflower Grow Guide

Marijuana Autoflower Grow Guide

Advantages of growing weed inside

It’s more resource-intensive than growing outdoors, you can control every aspect of your environment and what you put in your plant, so growing inside your home will permit you to dial in your setup to grow some primo weed.

Reside in an apartment or a small house? You can grow weed practically anywhere, even folks who don’t have a yard or a lot of additional space.

Unlike outside growing, you aren’t tied to the sun and the seasons. You can let your plants get as huge as you want, turn them into flower, harvest, and then start another batch immediately. You can grow whenever you want, even directly through winter.

Even in legal states, you may want to conceal your crop from judgmental neighbors and definitely from possible thieves. Growing inside permits you to grow quietly behind a locked door.

Step 1: Designate a marijuana grow room or space

The primary step in establishing your individual cannabis grow is producing a suitable space in which to do it. This area doesn’t even need to be a normal room it can be a closet, camping tent, cabinet, spare room, or a corner in an unfinished basement. Just keep in mind that you’ll need to customize your devices (and plants) to fit the space.

… But believe big

When creating your area, you’ll need to take into consideration not just the amount of space your plants will require, but also your lights, ducting, fans, and other devices. You’ll also need to leave enough room for you to work. Cannabis plants can double in size in the early stages of flowering, so make sure you have appropriate head area!

If your grow room is a cabinet, tent, or closet, you can just open it up and remove the plants to work on them; otherwise, you’ll need to make sure you leave yourself some breathing space.

Tidiness is vital

Make certain your area is quickly sanitized; cleanliness is very important when growing inside, so easy-to-clean surface areas are a must. Carpeting, drapes, and raw wood are all hard to tidy, so avoid these products if possible.

Keep it light-tight

Another crucial requirement for a grow space is that it be light-tight. Light leakages throughout dark periods will confuse your plants and can trigger them to produce male flowers.

Action 2: Pick your marijuana grow lights

The quality of light in your grow room will be the top environmental factor in the quality and quantity of your yield, so it’s a good concept to choose the best lighting setup you can pay for.

Here’s a brief rundown of the most popular kinds of marijuana grow lights used for indoor growing.

CONCEALED grow lights

HID (high-intensity discharge) lights are the industry standard, commonly used for their mix of output, effectiveness, and value. They cost a bit more than incandescent or fluorescent fixtures, but produce even more light per unit of electricity used. On the other hand, they are not as effective as LED lighting, however they cost as little as one-tenth as much for comparable units.

The two main kinds of HID lamp used for growing are:

Metal halide (MH), which produce light that is blue-ish white and are typically used during vegetative growth.

High pressure salt (HPS), which produce light that is more on the red-orange end of the spectrum and are utilized throughout the blooming phase.

In addition to bulbs, HID lighting setups require a ballast and hood/reflector for each light. Some ballasts are created for usage with either MH or HPS lights, while many more recent styles will run both.

If you can’t afford both MH and HPS bulbs, start with HPS as they deliver more light per watt. Magnetic ballasts are cheaper than digital ballasts, however run hotter, are less effective, and harder on your bulbs. Digital ballasts are usually a better alternative, but are more expensive. Beware of cheap digital ballasts, as they are often not well protected and can produce electro-magnetic interference that will affect radio and WiFi signals.

Unless you’re growing in a large, open space with a lot of ventilation, you’ll need air-cooled reflector hoods to mount your lights in, as HID bulbs produce a great deal of heat. This requires ducting and exhaust fans, which will increase your initial expense however make controlling the temperature level in your grow space a lot easier.

Published