How To Build Your Own Indoor Marijuana Grow Room
Advantages of growing weed inside
Although it’s more resource-intensive than growing outdoors, you can control every aspect of your environment and what you put in your plant, so growing inside will allow you to call in your setup to grow some primo weed.
Reside in a home or a cottage? You can grow weed almost anywhere, even folks who don’t have a yard or a lot of extra area.
Unlike outdoor growing, you aren’t tied to the sun and the seasons. You can let your plants get as big as you desire, flip them into flower, harvest, and then begin another batch right away. You can grow whenever you want, even directly through winter season.
Even in legal states, you may want to conceal your crop from judgmental neighbors and certainly from prospective thieves. Growing inside your home enables you to grow discreetly behind a locked door.
Action 1: Designate a marijuana grow room or space
The primary step in establishing your personal marijuana grow is developing a suitable area in which to do it. This space doesn’t even require to be a typical room it can be a closet, camping tent, cabinet, extra room, or a corner in an unfinished basement. Just remember that you’ll require to customize your equipment (and plants) to fit the space.
… However believe big
When developing your area, you’ll require to consider not just the quantity of space your plants will require, however likewise your lights, ducting, fans, and other devices. You’ll also need to leave enough room for you to work. Cannabis plants can double in size in the early stages of blooming, so make sure you have adequate head space!
If your grow space is a cabinet, tent, or closet, you can simply open it up and get rid of the plants to work on them; otherwise, you’ll require to ensure you leave yourself some breathing space.
Tidiness is crucial
Make sure your area is easily sanitized; cleanliness is essential when growing inside, so easy-to-clean surfaces are a must. Carpeting, drapes, and raw wood are all challenging to clean, so avoid these products if possible.
Keep it light-tight
Another important requirement for a grow space is that it be light-tight. Light leakages throughout dark durations will puzzle your plants and can trigger them to produce male flowers.
Step 2: Pick your cannabis grow lights
The quality of light in your grow room will be the number one ecological factor in the quality and quantity of your yield, so it’s an excellent idea to select the very best lighting setup you can pay for.
Here’s a brief rundown of the most popular types of cannabis grow lights utilized for indoor growing.
HID grow lights
HID (high-intensity discharge) lights are the industry standard, commonly utilized for their combination of output, performance, and value. They cost a bit more than incandescent or fluorescent fixtures, however produce even more light per unit of electrical power utilized. On the other hand, they are not as efficient as LED lighting, but they cost just one-tenth as much for equivalent units.
The two main types of HID lamp used for growing are:
Metal halide (MH), which produce light that is blue-ish white and are normally utilized throughout vegetative growth.
High pressure sodium (HPS), which produce light that is more on the red-orange end of the spectrum and are utilized during the blooming phase.
In addition to bulbs, HID lighting setups require a ballast and hood/reflector for each light. Some ballasts are designed for usage with either MH or HPS lamps, while lots of newer designs will run both.
If you can’t pay for both MH and HPS bulbs, start with HPS as they deliver more light per watt. Magnetic ballasts are cheaper than digital ballasts, however run hotter, are less effective, and harder on your bulbs. Digital ballasts are usually a better option, but are more expensive. Beware of inexpensive digital ballasts, as they are typically not well shielded and can create electromagnetic interference that will impact radio and WiFi signals.
Unless you’re growing in a large, open space with a great deal of ventilation, you’ll need air-cooled reflector hoods to mount your lamps in, as HID bulbs produce a great deal of heat. This requires ducting and exhaust fans, which will increase your preliminary expense but make controlling the temperature level in your grow space a lot easier.