Hardware Needed To Grow My Own Medical Marijuana Plants Inside

Hardware Needed To Grow My Own Medical Marijuana Plants Inside

Benefits of growing weed indoors

Although it’s more resource-intensive than growing outdoors, you can control every aspect of your environment and what you put in your plant, so growing inside your home will enable you to dial in your setup to grow some primo weed.

Reside in an apartment or condo or a small house? You can grow weed virtually anywhere, even folks who don’t have a backyard or a lot of extra space.

Unlike outdoor growing, you aren’t tied to the sun and the seasons. You can let your plants get as big as you desire, turn them into flower, harvest, and then start another batch immediately. You can grow whenever you desire, even directly through winter season.

Even in legal states, you might wish to conceal your crop from judgmental neighbors and absolutely from prospective burglars. Growing inside your home permits you to grow discreetly behind a locked door.

Step 1: Designate a cannabis grow room or area

The initial step in establishing your individual cannabis grow is creating an ideal space in which to do it. This space doesn’t even require to be a typical space it can be a closet, tent, cabinet, spare space, or a corner in an unfinished basement. Simply keep in mind that you’ll require to customize your equipment (and plants) to fit the space.

… However believe huge

When designing your space, you’ll require to consider not only the amount of space your plants will require, but also your lights, ducting, fans, and other devices. You’ll likewise need to leave enough space for you to work. Cannabis plants can double in size in the early stages of blooming, so ensure you have adequate head space!

If your grow room is a cabinet, camping tent, or closet, you can merely open it up and remove the plants to work on them; otherwise, you’ll need to make sure you leave yourself some breathing space.

Tidiness is crucial

Make certain your space is easily sanitized; tidiness is necessary when growing inside, so easy-to-clean surfaces are a must. Carpets, drapes, and raw wood are all challenging to clean, so avoid these materials if possible.

Keep it light-tight

Another crucial criterion for a grow room is that it be light-tight. Light leakages throughout dark durations will confuse your plants and can trigger them to produce male flowers.

Step 2: Select your marijuana grow lights

The quality of light in your grow space will be the primary ecological consider the quality and amount of your yield, so it’s an excellent concept to select the very best lighting setup you can pay for.

Here’s a brief rundown of the most popular types of marijuana grow lights used for indoor growing.

HID grow lights

HID (high-intensity discharge) lights are the market standard, commonly used for their mix of output, performance, and value. They cost a bit more than incandescent or fluorescent fixtures, however produce far more light per unit of electrical power used. Alternatively, they are not as efficient as LED lighting, however they cost as little as one-tenth as much for similar units.

The two primary types of HID light used for growing are:

Metal halide (MH), which produce light that is blue-ish white and are typically used during vegetative development.

High pressure salt (HPS), which produce light that is more on the red-orange end of the spectrum and are used during the flowering stage.

In addition to bulbs, HID lighting setups require a ballast and hood/reflector for each light. Some ballasts are developed for use with either MH or HPS lights, while numerous more recent designs will run both.

If you can’t manage both MH and HPS bulbs, start with HPS as they deliver more light per watt. Magnetic ballasts are cheaper than digital ballasts, however run hotter, are less effective, and harder on your bulbs. Digital ballasts are normally a much better choice, however are more expensive. Beware of cheap digital ballasts, as they are often not well protected and can create electromagnetic interference that will impact radio and WiFi signals.

Unless you’re growing in a big, open space with a lot of ventilation, you’ll need air-cooled reflector hoods to mount your lights in, as HID bulbs produce a lot of heat. This requires ducting and exhaust fans, which will increase your preliminary cost however make controlling the temperature in your grow space a lot easier.

Published